![]() When executing with setting the offset in a big value, frame pass is painted over.To perform separately frame cut and reverse cut in two processes, separated operation of frame and data cutting can be performed at separate timing. Improved the operability of Reverse Cut (Only for CFL-605RT FWVer.1.40 and later)įirst, perform all frame cut at obverse, and continuously perform data cut at reverse.Register color/layer of cutting condition as a favorite eachĪfter registering cutting condition and cutting order which is setting each color and layer as a favorite, apply the favorite, cutting condition and cutting order can be operated simply even though data is changed.Output defect to the plotter by the LAN connection.Ĭutting direction can be changed after checking cutting direction at Illustrator and click pass.Tool can be set by tool name in addition to current pen number from No1 to No 6. Tool name of output condition can be set (Only for CFL-605RT FW Ver1.50 or later).Not be able to run FineCut on Mac OS X 10.7 - 10.11.Outer and inner frames are simultaneously extracted using the frame extraction function. Trotec UniDrive ver 10.5 or higher, JobControl ver 10.6.1 or higher are required.(It is supported only by Illustrator CC-CC2017 Win/Mac)Ĭonditions for using Trotec laser output: RasterLink 6 Plus ver1.2 or higher, and CuttingLink ver 1.0 or higher are required.Then, detect the register marks with the cutting plotter. To do the ID cut, set the cutting condition with FineCut first and output the ID cut data.Īnd print register marks with the given ID with RasterLinkPlus. When a printer prints data with ID and a cutting plotter detects the ID, it can cut automatically by the function. Print data format can be selected and outputted from EPS / PDF. PDF is added to ID cut output format (print data). ![]() Mimaki UCJV300/150 series is now supported.When outputting ID cut after expanding / decreasing in size, the cut shifts incorrectly.When installing 32bit FineCut, UCJV150/300 default output condition file for Japanese was installed.In CF22-1225, output condition was not applied correctly.In CF22-1225, favorites could not be registered and applied normally.When recognizing register marks, head withdrawal function can be now used after cutting.In CF22-1225, RasterLink output can be now used.Mark separation function has been supported in CF22-1225.ID cut has bee supported in CFL-605 RT.In CG-FXII series, recommended register mark size is not displayed correctly.(Illustrator only).You can use it by applying CFL-605 RT FW Ver 1.70. In CFL-605 RT, square register marks can be created and confirmed.FineCut8 or Illustrator is forcibly terminated when recognizing register marks.How to recognize USB conversion adapter on macOS High Sierra(10.13) from here.How to deal with the trouble that the downloaded installer does not launch on Mac OS X 10.8 or later from here.How to recognize and read FineCut CD-ROM on macOS 10.12 or later from here.This Upgrade software requests older version of Mimaki FineCut CD-ROMwhile installation. ![]()
0 Comments
Leave a Reply. |